If the product’s anti-tamper security tape appears disrupted or if all the channel LEDs flash continuously, do not install the unit and call Belkin Technical support at +1 (800) 282-2355 Intended Audience This document is intended for the following professionals: •...
ADMINISTRATOR GUIDE Safety Precautions Please read the following safety precautions carefully before using the product: • Before cleaning, disconnect the product • The product should be stored and used from any electrical power supply. only in temperature and humidity- controlled environments as defined in the •...
ADMINISTRATOR GUIDE Safety Precautions (French) Veuillez lire attentivement les précautions de sécurité suivantes avant d’utiliser le produit: • En cas d’alimentation externe - L’alimentation • Avant nettoyage, débranchez l’appareil de de l’appareil surchauffe, est endommagée, l’alimentation DC /AC. cassée ou dégage de la fumée ou provoque des court circuits de la prise du secteur.
Criteria environmental requirements, products unit. If the problem persists, contact your system should never be connected to a microphone administrator or Belkin technical support. input. Do not connect a microphone to the 2. Product power-up and Reset to Factory Defaults: product audio output port, including headsets with microphone inputs.
Page 7
Belkin Technical Support. If you are aware of potential security vulnerabilities with any Belkin secure KM/KVM product, we encourage you to contact us immediately at gov_security@belkin.com or our technical support line at +1-800-282-2355.
ADMINISTRATOR GUIDE Administrator Configuration Warnings and Precautions The product enables authorized administrators to download event log files and audit the product history as well as have access to advanced settings. This function is available only to authenticated administrators. Note: the log data may not be erased and log functions may not be disabled by users or administrators.
Page 9
Note that the 11. If the user name or password is forgotten – display may or may not be connected contact Belkin support. through the product. 12. Note: The unit will enter tamper mode after 2.
ADMINISTRATOR GUIDE Terminal Mode Options Once authenticated, the following menu opens: authentication succeeded. please select operation... 0- asset management 1- firmware versions 2- configure dpp 3- configure sc 4- account management 5- reset to factory defaults 6- logs and events 7- configure peripheral devices 8- back 9- exit terminal mode...
Page 11
ADMINISTRATOR GUIDE Terminal Mode Operation Once authenticated the following menu will be presented: “Authentication succeeded. Please select operation... 0 – Asset Management By default, all authentication devices and Change the USB parameters that the KVM only authentication devices are allowed. You switch uses to identify itself to the connected can also use a tool that gives you for more computer.
Page 13
ADMINISTRATOR GUIDE Terminal Mode Operation 6 - Logs and Events • The Non-Critical RAM log: Its information is never deleted, not even The options are: during the RFD. The events kept on this log 1- show otp log are events like power up, peripheral device 2- show ram log acceptance, simple configuration change, 3- show non-critical RAM log...
Page 14
Any attempt to open the enclosure will activate the anti-tamper trigger and render the unit permanently inoperable. If the product’s anti-tamper security tape appears disrupted or if all the channel LEDs flash continuously, do not install the unit and call Belkin Technical support at +1 (800) 282-2355...