Apex Digital DOMUS 2+ User Manual page 9

Italiano
English
English
4. Plug the power cord into electrical outlet.
NOTE- 1. Make sure the pump unit
is suitable for the local
power voltage.
2. The plug is also served as
the disconnect device. Do
not position the equipment
so that it is difficult to
operate the disconnecting
device.
CAUTION- The pump can only be
applied to the mattress
recommended by the
manufacturer. Do not
use it for any other pur-
pose. (applied part: air
mattress)
5. Then turn the main power switch to ON
position which located on the display panel.
7