Configure This Server - Mitel MiVoice Business Installation And Administration Manual

C 5
HAPTER
Option:
Offline Sync with the AMC
Manage disk redundancy
Access server manager
Note: select [+] to access the
second page of options.
Manage trusted networks
View support and licensing
information
Perform backup
Verify a backup file
Restore from backup
Exit from the server console

Configure this Server

To configure this server:
In the Server Console main menu, click 2. Configure this server, and then click Next.
1.
In the configuration screens, enter the settings listed in the following table:
2.
Use this option to:
Use for AMC activation at sites where the MSL server does not
have direct Internet access. (Note: You will need Internet
access from another PC/workstation.)
Manage configuration of redundant (RAID1) disks.
Access the server manager using a text-based browser. This is
the same interface to which you can connect remotely using a
web browser; this option allows you to perform server manager
functions directly from the server console. Use the keyboard
arrow keys to navigate the pages. Type 'q' (for quit) to exit the
text-based browser. Note: most applications cannot be
managed using the text-mode browser.
The server uses a text-based browser called "ELinks" to
access the web-based server manager. ELinks information is
available at http://elinks.or.cz/about.html. Note that for security
reasons some ELinks features are disabled when you are
browsing from the server console (such as the ability to specify
an external URL).
Show, add, or delete trusted networks access privileges to
additional IPv4 and IPv6 networks. Note: For security, we
recommend that you be as precise as possible when granting
access (for example, enter the IP address of a specific PC or
subnet).
Display the licensing terms.
Back up configuration information to a USB device or a network
file server. For more information see
recommended to perform backup using Server Manager
(Administration > Backup).
Verify previous backup files. For more information, see
Backup.
Restore backup files is not supported remotely. User Server
Manager (Administration > Restore) to restore backup file.
Exit from the Server Console.
咨询订购：400-010-8885、 Support@mitel.com.cn
C S U
ONFIGURE THE ERVER SING
Performing
S C
ERVER ONSOLE
M
AINTENANCE
Backups. It is
Verify
47