Table of Contents
Advertisement
Table 5-7
Fan description and part number
Description
Fan assembly
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the fan assembly:
1.
Disconnect the fan cable from the system board (1).
2.
Remove the three Phillips M2.0 × 3.0 screws (2), and then remove the fan (3).
Reverse this procedure to install the fan assembly.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-8
Heat sink descriptions and part numbers
Description
Heat sink
Before removing the heat sink, follow these steps:
30
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
23).
Battery on page
24).
Spare part number
M02014-001
23).
Spare part number
M31753-001
Advertisement
Table of Contents
