Royal BAITA v2 Instructions For Use And Maintenance Manual page 26

6 Installation
6.1 Introduction
• Improper installation can affect the safety of the
equipment.
• In the presence of flammable structures or materials
on the back or adjacent to the fire box, respect the
minimum safety distances given at the end of this manual.
• All combustible materials that are located in the area
radiated by the heat from the glass of the door must be
placed at a distance of at least 150 cm from it.
6.2 Preliminary operations
Before connecting the stove to the fumes evacuation
system, it is necessary to:
• check that the internal firebrick (A) placed on the top
of the combustion chamber is completely against the
support (B) (Fig. 6.2a);
• install the smoke valve pipe (C), keeping attention
that the adjusting handle (D) is facing forward; seal with
silicone for high temperature the valve in correspondence
with the cast iron collar (Fig. 6.2b).
Product images are purely indicative
26
D
00 477 7671- 25/06/2019 - PN - Italy
B
A
C
Fig. 6.2a
Fig. 6.2b