BMW K 1200 GT Rider's Manual page 66

tifunction display, and spring
4
preload in panel 2.
64
Calling up settings
Switch on the ignition.
z
Press button 1.
The current setting is dis-
played.
The reading remains visible
for a few seconds before
disappearing automatically.
Adjusting suspension
damping
Switch on the ignition.
Press button 1.
You can adjust the
damping characteristic
while the motorcycle is on the
move.
The current setting is dis-
played.
Press button 1 once briefly.
The display field starts
at the current status and
cycles through the following
sequence:
Comfortable
COMFORT
damping characteristic
Normal damping
NORMAL
characteristic
Sporty damping
SPORT
characteristic
The setting shown on the
display is automatically
accepted as the damping
characteristic if you allow
a certain length of time
to pass without pressing
button 1. The reading
flashes while adjustment is
in progress.
Adjusting spring preload
Start the engine.
Press button 1.