BMW K 1200 GT Rider's Manual page 108

7
106
Remove screw 4 for the
bracket of the end silencer
from the rear footrest.
Turn the end silencer down.
Engage first gear.
z
Remove studs 5 from the
rear wheel, holding the
wheel as you do so.
Lower the rear wheel to the
ground.
Roll the rear wheel out to-
ward the rear.
Installing rear wheel
Threaded fasteners not
tightened to the spe-
cified torque can work loose
or their threads can suffer
damage.
Always have the security of
the fasteners checked by a
specialist workshop, prefer-
ably an authorised BMW Mo-
torrad dealer.
Roll the rear wheel into po-
sition at the rear-wheel ad-
apter.
Seat the rear wheel on the
rear-wheel adapter.
Install wheel studs 5 and
tighten to specified torque
in diagonally opposite se-
quence.
Rear wheel to wheel
flange
60 Nm