Table of Contents
Advertisement
Enabling automatic volume
Your device can increase or decrease the volume automatically based on the level of background noise.
1 Select
.
2 Select Automatic Volume.
Using the audio mixer
You can use the audio mixer to set the volume levels for different audio types, such as navigation prompts or
phone calls. The level for each audio type is a percentage of the master volume.
1 Select
.
2 Select Mixer.
3 Use the sliders to adjust the volume for each audio type.
Adjusting the screen brightness
1 Select
> Display > Brightness.
2 Use the slider bar to adjust the brightness.
The driver alerts and speed limit features are for information only. They do not replace your responsibility to
abide by all posted speed limit signs and to use safe driving judgement at all times. Garmin
for any traffic fines or citations that you receive for failing to follow all applicable traffic laws and signs.
Your device provides features that can help encourage safer driving and increase efficiency, even when you are
driving in a familiar area. The device plays an audible tone or message and displays information for each alert.
You can enable or disable the audible tone for some types of driver alerts. Not all alerts are available in all
areas.
Schools: the device plays a tone and displays the speed limit (if available) for an upcoming school or school
zone.
Speed limit exceeded: the device plays a tone and displays a red border on the speed limit icon when you
exceed the posted speed limit for the current road.
Speed limit reduced: the device plays a tone and displays the upcoming speed limit so you can be prepared to
adjust your speed.
Wrong way on a one-way street: the device plays a message and displays a full-screen warning if you travel the
wrong way on a one-way street. The edges of the screen appear red and an alert remains at the top of the
screen until you leave the one-way street or correct your direction of travel.
Level crossing: the device plays a tone to indicate an upcoming level crossing.
Animal crossing: the device plays a tone to indicate an upcoming animal crossing area.
Bends: the device plays a tone to indicate a bend in the road.
Slower traffic: the device plays a tone to indicate slower traffic when you approach slower traffic at a higher
speed. Your device must be receiving traffic information to use this feature
Construction zone: the device plays a tone and displays a message when you approach a construction zone.
Lane closure: the device plays a tone and displays a message when you approach a lane closure.
Break planning: the device plays a tone and suggests upcoming rest stops after you have been driving for a
long time.
Enabling or Disabling Driver Alerts
You can enable or disable several types of driver alerts.
1 Select
> Driver Assistance > Driver Alerts.
2 Select or clear the tick box next to each alert.
4
Driver awareness features and alerts
CAUTION
is not responsible
®
(Traffic, page
28).
Driver awareness features and alerts
Advertisement
Table of Contents
