Rear Panel - Audio Technica SmartMixer AT-MX341a Installation And Operation Manual

AT-MX341a Rear Panel
1. Power input. Requires 12 volts AC or 15 volts DC, either polarity; 150 mA minimum.
2. Link In /Out. Provides for daisy-chaining of multiple mixers when more than four
microphones are used.
3. Control Voltage Out. Provides 0 to +4 VDC (active high) to trigger external devices such
as speaker switching, camera switching and indicator lights.
4. Output. Balanced line-level output. Can be changed to mic-level output via internal
switch (see page 7). XLRM-type connector.
5. Inputs. Balanced microphone inputs for low impedance dynamic or condenser mics.
Can be changed to line-level inputs via internal switches (see page 7). XLRF-type connectors.
Control Voltage Out
AC 12V Input
Figure 2. Rear panel
4 3 2 1 GND
Output
Link In Link Out
Input 4 Input 3 Input 2 Input 1
5