Advertisement
For the PR90 programmable incremental optical encoder to work correctly, you must follow the detailed configuration instructions
below:
Make sure, before you connect the encoder, that
the configuration required for the encoder is the
correct type for your application.
Connect the PR90 encoder to a USB port
Step 1:
direct connection
1.1
to a USB port
Programming software installation
Step 2:
install Java on
2.1
your computer
1
2
Pay special attention to the TTL / HTL output configuration, since
if the proper voltage output is not selected, the devices
connected to the encoder could report read errors.
You must open the connection cover located at the back of the PR90 encoder.
The connection is direct, using a uUSB / USB cable to connect to any computer or
tablet-pc, without any other equipment being required.
3
You can install the latest version of Java
from the Web:
https://www.java.com/es/download/
USER MANUAL
PR90 / PR90H
Software compatible from version
8.45 of Java
9
Connect
Advertisement
