Advertisement
Default configuration
The encoder comes default
preconfigured with:
- Pulses: 4096 ppr
- Output: HTL
- Direction: Clockwise (CW)
- Reference signal position (Z): 0º
- Reference signal width
(Índex, Z, 0): 90º
1
2
G
H
3
Write Encoder
Record the configuration to the encoder
Once these options have been selected, click on
"Write Encoder" in the upper task-bar of the
programming screen.
The upper task-bar should show green, confirming
data recording progress, showing the term "ACK:".
Which means that the recording process has finished
correctly.
Read Encoder
We can verify that the data has been recorded
correctly by clicking on "Read Encoder" in the upper
task-bar in the programming screen.
Thus, we verify that the data we have loaded
corresponds to the date recorded in the PR90 and
that the alarm status has been updated.
Once the encoder has been programmed, it is
imperative to close the connection cover again to
ensure IP65 protection.
USER MANUAL
PR90 / PR90H
16
Program
Advertisement
