Advertisement
Run the programming software
Step 3:
configure the
3.1
COM port
1
2
Without disconnecting the PR90 from any of the computer or tablet's USB ports, open the "Communication
Port"
menu on the interface, choose the corr
menu on the interface, choose the corresponding communications port (COMX),
A
encoder is connected.
Once chosen, click on the button
Once chosen, click on the button
interface will fill out with the monitoring and programming screens.
A
3
in the upper bar.
in the upper bar.
In appr
In approximately 2 seconds the programming
C
B
C
If an error message appears, click on "Refresh" and
then choose the port where the PR90 is
connected
connected
USER MANUAL
PR90 / PR90H
,
wher
where the
B
from the drop-down menu.
from the drop-down menu.
B
Connect
12
Advertisement
