Main Control Options; Your System Is Preset At The Factory - Viessmann Vitodens 200 Operating Instructions And User's Information Manual

Vitodens 200, WB2 Operating

Main Control Options

Your System is Preset at the Factory

"|" points to
the current day
of the week
1 = Monday
2 = Tuesday
etc.
Digital display
(here: 63°C boiler
water temperature)
All settings can be adjusted directly on the boiler control
or on the remote control (when the programming unit is
used as remote control).
The programming unit can be removed from the control
unit and mounted on a wall-mount base (available as
accessory) anywhere in your main living area and used
as a remote control. In instances where the programming
unit is used as remote control, a temperature indicator
(available as accessory) must be installed in place of
the programming unit in the control base on the boiler.
The control unit is located behind the hinged cover in the
front of the boiler. Open hinged cover of the control by
exerting slight pressure with your fingertip on top of
the cover. Ensure hinged cover is closed after every use
to guarantee splash protection.
The control unit comes factory preset to a standard
operating mode.
This means your heating system is ready for operation.
All factory default settings can be changed to reflect your
personal preferences.
Date and time
The date and time are factory preset and are updated
through the built-in long-life battery. Should time and/or
date be incorrect please see section entitled "Changing
Time and Date" on page 18 in this manual.
Heating program
The heating program is set to "Space heating and
domestic hot water", i.e. space heating and domestic
hot water production take place in accordance with
preset switching times.
Note: Press button "D" to reset the switching times to
their factory default settings. Please note that this
will reset all altered values to their original factory
default setting.
Switching times
The switch-on time is set to 6:00 hrs, the switch-off time
to 22:00 hrs. Between 6:00 hrs and 22:00 hrs, space
heating takes place at normal room temperature with
domestic hot water production (if installed) when
required.
Between 22:00 hrs and 6:00 hrs, space heating takes
place at reduced room temperature.
Operation
9