Advertisement
INSTALLATION
WARNING
• To reduce the risk of electrical shock do not open
the detector. There are no user serviceable parts
inside. Refer service to a qualified service
personnel only.
• Cleaning — Use a dry cloth to clean the product.
Do not use liquid cleaners or aerosol cleaners
• Water and moisture — Do not use the product
near water. Do not install the product in a place
where water may splash onto it.
• Do not operate the detector with a hard, sharp or
pointed object such as a fingernail or pen.
1. To separate the backplane from the detector, rotate
the backplane clockwise according to the direction
of the arrow (See Fig. 3 and 4).
2. Use a screwdriver to punch out the appropriate
opening. See Fig. 5.
Fig. 3.
Fig. 4.
Fig. 5.
3. Pull wires through the opened hole. See Fig. 6 and 7.
4. Unplug the terminal block from the contact pin. See
Fig. 8.
5. Connect the cable to the terminal block, then secure
with the mounting screw. See Fig. 9, 10, and 11.
3
C7355A ROOM IAQ MONITOR
Fig. 6.
Fig. 7.
Fig. 8.
Fig. 9.
31-00434—01
Advertisement
