Technical Specifications - Siemens SIMATIC ET 200AL Manual

Technical specifications

Technical specifications of the AQ 4xU/I 4xM12 analog output module
The following table shows the technical specifications as of 05/2019. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7145-5ND00-0BA0/td?dl=en).
Article number
General information
Product type designation
HW functional status
Firmware version
Product function
I&M data
•
Engineering with
STEP 7 TIA Portal configurable/integrated
•
as of version
STEP 7 configurable/integrated as of ver-
•
sion
PROFIBUS as of GSD version/GSD revi-
•
sion
PROFINET as of GSD version/GSD revi-
•
sion
Supply voltage
Load voltage 1L+
Rated value (DC)
•
permissible range, lower limit (DC)
•
permissible range, upper limit (DC)
•
Reverse polarity protection
•
Input current
Current consumption (rated value)
from load voltage 1L+ (unswitched voltage)
from load voltage 2L+, max.
Actuator supply
Number of outputs
Short-circuit protection
24
6ES7145-5ND00-0BA0
AQ 4xU/I
FS03
V1.0.x
Yes; I&M0 to I&M3
STEP 7 V14 or higher
V5.5 SP4 Hotfix 7 or higher
GSD as of Revision 5
GSDML V2.3.1
24 V
20.4 V
28.8 V
Yes; Against destruction; actuator power supply
outputs applied with reversed polarity
110 mA; without load
4 A; Maximum value
4 A; Maximum value
4
Yes; per module, electronic
Analog output module AQ 4xU/I 4xM12 (6ES7145-5ND00-0BA0)
6
Manual, 07/2019, A5E38687953-AB