Parameters - Siemens SIMATIC ET 200AL Manual

Parameters/address space

4.2 Parameters

4.2 Parameters
Parameters of the AQ 4xU/I 4xM12 analog output module
The table below lists the parameters that can be set. The effective range of the parameters
that can be set depends on the type of configuration. The following configurations are
possible:
● Distributed operation on PROFINET IO
● Distributed operation with PROFIBUS DP
The following parameter settings are possible:
Table 4- 2
Parameters
Output type/range
Diagnostics: Actuator
supply short circuit to
ground
Diagnostics: Short circuit
to ground
(output type voltage)
Diagnostics: Wire break
(output type current)
Diagnostics: Underflow
Diagnostics: Overflow
16
Configurable parameters and their defaults
Value range
Disabled
•
Voltage ±10 V
•
Voltage 0 V to 10 V
•
Voltage 1 V to 5 V
•
Current ±20 mA
•
Current 0 mA to
•
20 mA
Current 4 mA to
•
20 mA
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Default GSD file
PROFINET IO
Current Channel
4 mA to
20 mA
Disable Module
Disable Channel
Disable Channel
Disable Channel
Disable Channel
Analog output module AQ 4xU/I 4xM12 (6ES7145-5ND00-0BA0)
Manual, 07/2019, A5E38687953-AB
GSD file
PROFIBUS DP
Channel
Module*
Module
Module
Module