Turning Off The Main Power; Saving Energy - Ricoh Pro C5200 Series Training

CIP Training Pro C5200 series
Throughput
• After you switch the main power on, a screen may appear to indicate that the
machine is initializing. Do not switch the power off during this process. Initialization
takes about 18 minutes. However, the time for initialization may differ depending on
which options are installed on the machine.
• If the machine does not turn on even if you press the main power switch, open the front
left cover and make sure that the AC power switch is turned on.
• Application icons appear on the [Home] screen as the applications start running.

Turning Off the Main Power

• Do not turn off the power while the machine is in operation.
• Do not hold down the main power switch while turning off the main power.
Doing so forcibly turns off the machine's power and may damage the hard disk or
memory and cause malfunctions.
1. Open the main power switch cover, and then push the main power switch.
The main power indicator goes out. The main power turns off automatically
when the machine shuts down. If the screen on the control panel does not
disappear, contact your service representative.

Saving Energy

This machine has the following energy saving functions. Fusing Unit Off mode
If you do not use the machine for a certain period after an operation, the machine
makes a clicking sound and enters Fusing Unit Off mode.
When the machine is in Fusing Unit Off mode, the display is on but the fusing unit
heater is off to save energy. In this mode, you can change the machine's settings on the
control panel. However, the machine must exit this mode to print.
You can change the amount of time that the machine waits before switching to Fusing
Unit Off mode under [Fusing Unit Off Mode (Energy Saving) On/Off]. For details, see
"System Settings", Device Management.
To exit Fusing Unit Off mode, start print jobs.
The time required to return from Fusing Unit Off mode and resume printing is as long as
the time required for warm-up time. For details about the warm-up time.