Kia Cerato 2019 Owner's Manual page 482

Table of Contents

Advertisement

Maintenance
Valve clearance
Inspect for excessive valve noise
and/or engine vibration and adjust if
necessary. In this case, have the sys-
tem serviced by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service partner.
Cooling system
Check the cooling system compo-
nents, such as the radiator, coolant
reservoir, hoses and connections for
leakage and damage. Replace any
damaged parts.
8
40
Coolant
The coolant should be changed at
the intervals specified in the mainte-
nance schedule.
Manual transaxle fluid
(if equipped)
Inspect the manual transaxle fluid
according to the maintenance sched-
ule.
Automatic transaxle fluid
(if equipped)
Automatic transaxle fluid should not
be checked under normal usage
conditions.
Have the automatic transmission fluid
changed by a professional workshop
according to the maintenance sched-
ule. Kia recommends to visit an
authorised Kia dealer/service partner.
✽ ✽ NOTICE
Automatic transaxle fluid colour is
basically red.
As the vehicle is driven, the auto-
matic transaxle fluid will begin to
look darker. It is normal condition
and you should not judge the need to
replace the fluid based upon the
changed colour.
CAUTION
The use of a non-specified fluid
could result in transaxle mal-
function and failure.
Use only specified automatic
transaxle
fluid.
(Refer
"Recommended lubricants and
capacities" in chapter 9.)
to

Advertisement

Table of Contents
loading

This manual is also suitable for:

K3 2019

Table of Contents