Kia Cerato 2019 Owner's Manual page 419

TYRE PRESSURE MONITORING SYSTEM (TPMS) (IF EQUIPPED)
(1) Low tyre pressure telltale
(2) TPMS SET switch
■ ■ System Overview
The tyre pressure monitoring system
(TPMS) senses change in radius of
the tyre. If the tyre pressure decreas-
es below the recommended pres-
sure, the system warning light will be
illuminated.
For the system to function properly, it
OBD068005R
is the driver's responsibility to set the
system by following accurate proce-
dure and set current tyre pressure.
The warning light will illuminate on the
cluster when one or more of your tyres
is under-inflated after the TPMS is set.
The warning light will also illuminate to
warn the driver of system malfunction.
Please refer to the above image (1)
OBD068022R
for further information.
What to do in an emergency
■ ■ TPMS Setting
The driver can set the TPMS by fol-
lowing procedures below:
1) Inflate all tyres to the recommend-
ed pressure.
2) Start the engine, make sure the
vehicle is not moving, and press
the TPMS switch (2) right side on
the driver's seat for over 3 sec-
onds.
3) Check if the ( ) warning indica-
tor blinks for 4 seconds.
7 9