Diagrams - Sony ZS-S10CP Service Manual

ZS-S10CP
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards.
Note:
• X : Parts extracted from the component side.
• Y : Parts extracted from the conductor side.
• : Internal component.
f
• : Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
• Indication of transistor.
C
Q These are omitted.
B E
Q
B C E
These are omitted.
• Abbreviation
E41 : Chilean and Peruvian models
E92 : Panamanian model
MX : Mexican model
SP5 : Asian model
ZS-S10CP
SECTION 5

DIAGRAMS

For Schematic Diagrams.
Note:
• All capacitors are in μF unless otherwise noted. (p: pF) 50
WV or less are not indicated except for electrolytics and
tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specifi ed.
• : Internal component.
f
• C : Panel designation.
Note: The components identifi ed by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specifi ed.
• A : B+ Line.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
no mark : FM
[ ] : AM
( ) : CD PLAY
• Voltages are taken with VOM (Input impedance 10 M).
Voltage variations may be noted due to normal production
tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production
tolerances.
• Circled numbers refer to waveforms.
• Signal path.
: FM
F
f : AM
J : CD PLAY
: AUDIO IN
L
• Abbreviation
AUS : Australian model
E41 : Chilean and Peruvian models
E92 : Panamanian model
MX : Mexican model
SP5 : Asian model
• Circuit Boards Location
BUTTON (MAIN) board
16 16
MOTOR board
HP JACK board
MAIN board
AUDIO IN JACK board
POWER board