Inserting a PC Card
1.
Insert the PC card, with the connector side first
and label side up, into the socket until it is flush
with the Notebook PC's side.
Removing a PC Card
To remove the PC card, remove all cables or adapters attached to the PC card.
1.
Press the eject button once to extend it. Press
the extended eject button firmly back into the
Notebook PC to eject the PC card.
2.
Carefully connect any cables or adapters
needed by the PC card. Usually a sticker or
marking is used on one side of the connector
to show the top side.
2.
Slowly slide the PC card out of the Notebook
PC.
45