Inserting A Pc Card Or Expresscard; Removing A Pc Card; Removing An Expresscard - Asus VX1 Hardware User Manual

Notebook pc

Hide thumbs Also See for VX1:

Table of Contents

Using the Notebook PC

Inserting a PC Card or ExpressCard

1. If there is a PC Card socket protector, remove

it using the "Removing a PC Card" instructions

below.

2. Insert the PC card with the connector side first

and label side up. Standard PC cards will be

flush with the Notebook PC when fully inserted.

To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the

PC card icon on the Windows taskbar and stop the PC card you want to remove.

1. Press in the toggle eject button and release.

The recessed spring loaded toggle button

will extend when pushed in and released.

The ExpressCard slot does not have an eject button. Remove the ExpressCard like a memory card.

Press the ExpressCard inwards and release to eject the ExpressCard.

Be sure the PC card is

level when inserting.

3. Carefully connect any cables or adapters

needed by the PC card. Usually connectors can

only be inserted in one orientation. Look for a

sticker, icon, or marking on one side of the con-

nector representing the top side.

2. Press the extended button again to eject the

PC Card. Carefully pull the ejected PC card

out of the socket.

Table of Contents