NOTE: The CD drive eject button is electronic and requires that the Notebook PC be powered ON
in order to eject the CD drive tray. Only one CD may be used at one time on this CD drive.
Inserting a CD
1.
Press the CD drive eject button and the CD
drive tray will eject out partially.
3.
Place a CD with the printed side facing up.
2.
Hold the CD drive's front panel and slide the CD
drive tray completely out.
4.
Snap the CD onto the hub by pressing on both sides
of the CD's center. The hub should be higher than
the CD when correctly mounted. Slowly push
the CD drive tray back into the Notebook PC.
37