Exit Menu - Asus Terminator K7 User Manual

5.8 Exit Menu

Once you have made all of your selections from the various menus in the
Setup program, you should save your changes and exit Setup. Select Exit
from the menu bar to display the following menu:
NOTE: Pressing <Esc> does not exit this menu. You must select one
of the options from this menu or <F10> from the legend bar to exit
this menu.
Exit Saving Changes
Once you are finished making your selections, choose this option
from the Exit menu to ensure the values you selected are saved to
the CMOS RAM. The CMOS RAM is sustained by an onboard backup
battery and stays on even when the PC is turned off. Once this op-
tion is selected, a confirmation is asked. Select [Yes] to save changes
and exit.
NOTE: If you attempt to exit the Setup program without saving your
changes, the program prompts you with a message asking if you
want to save your changes before exiting. Pressing <Enter> saves
the changes while exiting.
Exit Discarding Changes
This option should only be used if you do not want to save the changes
you have made to the Setup program. If you have made changes to
fields other than system date, system time, and password, the sys-
tem asks you to confirm the changes before exiting.
108 Chapter 5: BIOS Information