Boot Menu - Asus Terminator K7 User Manual

5.7 Boot Menu

Boot Sequence
The Boot menu allows you to select among the four possible types of
boot devices listed using the up and down arrow keys. By using the
<+> or <Space> key, you can promote devices and by using the <->
key, you can demote devices. Promotion or demotion of devices alters
the priority which the system uses to search for a boot device on system
power up. Configuration fields include Removable Devices, IDE Hard
Drive, ATAPI CD-ROM, and Other Boot Device.
Removable Device [Legacy Floppy]
Configuration options: [Disabled] [Legacy Floppy] [LS120] [ZIP]
[ATAPI MO] [USB FDD] [USB ZIP]
IDE Hard Drive
This field allows you to select which IDE hard disk drive to use in the
boot sequence. Pressing [Enter] will show the product IDs of all
connected IDE hard disk drives.
ATAPI CD-ROM
This field allows you to select which ATAPI CD-ROM drive to use in
the boot sequence. Pressing [Enter] will show the product IDs of all
your connected ATAPI CD-ROM drives.
IMPORTANT
Make sure the ATAPI CD-ROM drive that you want to use in the boot
sequence is connected to either the PRIMARY or SECONDARY IDE
connectors, not to the ATA100 connectors. Currently, the Promise®
Ultra DMA/100 chip does not support this feature.
106 Chapter 5: BIOS Information