Table of Contents
Advertisement
Model SB1063
Maintenance Schedule
ON
Always disconnect
machine from power before
performing maintenance or
OFF
serious personal injury may
result.
Regular maintenance will ensure proper care
of the equipment. We strongly recommend that
all operators make a habit of following the daily
maintenance procedures.
For optimum performance from this machine,
this maintenance schedule must be strictly
followed. Use the Monthly Maintenance Chart
on Page 35 to ensure this is done.
Ongoing
To maintain a low risk of injury and maximize
efficient machine operation, periodically evaluate
the listed items below. If a problem is found,
immediately shut the machine down, disconnect
it from power, and fix the problem before
continuing operations.
•
Loose mounting bolts or fasteners.
•
Worn, frayed, cracked, or damaged wires.
•
EMERGENCY STOP button not working
correctly.
•
Missing belt or chip guards.
•
Reduction in braking speed or efficiency.
•
Coolant not flowing correctly.
•
Worn or damaged tooling.
•
Any other unsafe condition.
-34-
M A I N T E N A N C E
Before Beginning Operations
•
Make sure the electric box door is closed and
properly latched.
•
Check the coolant reservoir in the base. Fill
it or clean it out if necessary.
•
Verify that oiler lubrication reservoirs are
full enough for the operation.
•
Loosen or tighten applicable table and
spindle lock levers for the upcoming
operation.
Daily, After Operations
•
Push the EMERGENCY STOP button.
•
Turn the main power switch to the OFF
position.
•
Vacuum/clean all chips and swarf from table,
slides, and base.
•
Wipe down all unpainted or machined
surfaces with a high-quality rust
preventative compound.
•
Wipe away excess flood oil from areas that
are auto lubricated.
For Machines Mfd. Since 5/19
Advertisement
Table of Contents
