Tumble Drying; Sort Your Fabrics; Turn On The Main Power Switch; Open The Door, Load The Items And Then Close The Door - Asko T712C Operating Instructions Manual

Tumble drying

Below are step-by-step instructions to help
you achieve the best possible tumble-drying
results.
1

Sort your fabrics

You will achieve the most uniform drying
results if the items are made of the same
type of material. Do up zips and buttons, fas-
ten belts, sort the items and adjust the load
and temperature.
2

Turn on the main power switch.

3
Open the door, load the items
and then close the door
4

Select the program

The choice of program depends on what
you intend to do with the items after
drying them.
Guidelines as to what specific programs
can be used for.
Auto Extra dry
Auto Extra dry
Timed dry
Auto Extra dry
This program is for items that are particularly
difficult to dry, e.g. jeans with very thick
seams.
Note!
Knitted fabrics in particular are prone to
shrinkage. Use the Auto Extra dry, Auto Nor-
mal dry or Auto Iron dry programs for these
items. Stretch clothes back into shape imme-
diately after drying.
10
Auto Extra dry and Auto Normal dry
These programs shut off the heat once the
load is dry but before it is "bone-dry". The
Auto Extra dry program shuts off the heat
slightly later than Auto Normal dry. Use trial
and error to find out what works best. Use
these programs when you want items to be
completely dry.
Auto Iron dry
This program shuts off the heat once the load
is just damp enough for ironing or pressing.
Timed dry
The Timed dry program has a fixed drying
time and tumble-dries the load for 60 minutes
5
An estimate of the remaining drying time will
be shown on the display within 2 minutes of
the drying program starting. For example,
1:35 means that it will take approximately 1
hour and 35 minutes for the load to dry. If the
Anti-crease option has been selected, the
drum will rotate every minute for 2 hours after
cooling.
Auto Normal dry
Stopping or changing a program
Auto Iron dry
Press and hold the Start/Stop button for three
Revitalise
seconds. The red field next to the button will
go out.
Note!
The program will not be affected if you change
the program selector after the program has
started.
Loading or removing washing
If you want to load or remove washing once
you have started the machine, open the door
and the program will stop. Load more washing
or take out the items you want, close the door
and press the Start/Stop button.

Press the Start button

Remaining drying time