Settings; Fan Cooling; Child-Safe Starting; Reprogramming - Asko D1796 Use And Care Manual

SETTINGS

REPROGRAMMING

Some of the machine functions can be reprogrammed. Access to reprogramming of the machine is
gained via the ordinary control buttons as explained below. Any alteration made will remain intact
until the next time you alter the functions.
Even if the machine is turned off using the main power switch, or if power is cut off in any other
way, the selections made prior to loss of power will remain intact.
The selection is shown for two seconds by the indicator lamps, after which the machine returns to
the main programme.
Empty lamp symbol implies lamp off.
Filled lamp symbol implies lighted lamp.
Filled lamp symbol crossed out and underlined implies flashing lamp.

CHILD-SAFE STARTING

Inadvertent starting of the machine by a child can be counteracted by programming the machine to
start only if the start button is pressed for three seconds to enable it to start.
1. PRESS QUICK WASH FIVE TIMES* (WITHIN 15 SECONDS)
2. PRESS RINSE ONCE TO OBTAIN CHILD-SAFE START
OR RESET:
2. PRESS QUICK WASH ONCE AND YOU WILL GET NORMAL FUNCTION
* The latest selected setting will be shown.

FAN COOLING

You may allow the fan to cool the dishware for 30 minutes after drying.
1. PRESS FIVE TIMES ON INTENSIVE WASH* (WITHIN 15 SECONDS)
2. PRESS RINSE ONCE TO GET EXTRA FAN COOLING
OR RESET:
2. PRESS QUICK WASH ONCE AND YOU WILL GET NORMAL FAN COOLING -
* The latest selected setting will be shown.
20
Display Lamps
3
-
1