Sign in today to find solutions:

Don't have an account? Sign up

 
Quick Start Guide
We know you're excited about owning an ASKO dishwasher and you're anxious to get started, so here's a brief summary of the operation
procedures. The page references in this guide refer to the Use and Care Guide. To get the most out of the features of your new
dishwasher, we recommend that you read the Use and Care Guide.
THE CONTROL PANEL
THE CONTROL PANEL
Model D1776 has a touchpad control panel, as illustrated below. To select a wash program or the heat dry option, simply press the
appropriate touchpad. When you press a touchpad, a red indicator light at the upper left of the touchpad glows to show that you selected
that program.
Indicator Lights
These lights glow red to
indicate which program you
have selected.
PROGRAMS
PROGRAMS
Your ASKO dishwasher has three wash programs, a rinse and hold option and a heat fan dry option. Press the touchpad to select the
desired program and option.
Pots and pans
For the heaviest soiled loads, such as pots, pans,
casseroles, etc.
Normal
For normal wash loads.
Heat dr y
Heat dr y
This touchpad activates the heating element during the drying cycle to speed up the drying process.
CHANGING A PROGRAM
CHANGING A PROGRAM
If you've started the dishwasher then decide to change the program or turn off the Heat dry option, simply press the original program
touchpad for three to five seconds to stop the dishwasher. You can then press the touchpad for the desired program.
UNDERSTANDING THE INDICATOR LIGHTS
UNDERSTANDING THE INDICATOR LIGHTS
When the dishwasher has finished, all of the indicator lights will come on. The lights will remain on until you open the door.
If the lights flash in an alternating pattern after you have started a program, this usually means the dishwasher door is not closed
securely. Push the door closed until you hear it click shut.
If all of the lights on the control panel flash in sequence, this means the machine has detected an overfill. (See page 7.) Should this
happen, call the ASKO Advisory Center.
Touchpad Controls
Press one of these touchpads to select a program or option.
SUPER CLEANING SYSTEM
LED Window
The LED window displays water temperature,
program run time and fault codes.
Quick
For lightly soiled loads. Items such as fine china
and crystal can be washed in this program, but you
should turn the Heat dry off.
Rinse and hold
To rinse dishes that you plan to wash later that day.
Model D1776
Next page ->

Summary of Contents

  • Page 1

    PROGRAMS PROGRAMS Your ASKO dishwasher has three wash programs, a rinse and hold option and a heat fan dry option. Press the touchpad to select the desired program and option. Pots and pans Quick For the heaviest soiled loads, such as pots, pans, For lightly soiled loads.

  • Page 2

    Raising your water heater setting could help to shorten the cycle times. If this doesn’t help, call the ASKO Advisory Center. Fault Codes Fault Codes The LED window displays three fault codes, as illustrated below.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: