Reverb Parameters - Art DMV Pro User Manual

Programmable digital effects processor

Hide thumbs

Table of Contents

Instrument

The Instrument Reverb is tailored for most solo instruments to maintain their tonal quality. High frequency

decays are not limited and low frequencies are controlled to prevent muddiness. An auxiliary gate is available

to dynamically process the sound.

Concert

The Concert Reverb has a neutral high frequency response with a low frequency decay emphasis. It should

be used on sounds or mixes to simulate the "liveness" of a real acoustic location. An auxiliary gate is available

to dynamically process the sound.

Gated

The Gated Reverb class simulates a gated reverb impulse without actually using a noise gate; the effect is

produced within the algorithm. Therefore, both loud and soft sounds will benefit from the effect. This class

provides spaciousness without the clutter of a reverb decay tail.

Ambient

Ambient Reverb is used to capture the early-reflections that are part of reverberated sound. It is excellent for

creating close spaces, matching a dialogue to a room, and adding a sense of distance to close miking.

Though you can increase decay, the bandwidth is controlled to always unmask the early-reflections.

Dynamic

Dynamic Reverb uses input level to switch the Decay time from a minimum setting to a preset length. By

dynamically changing the Decay time you can get both an uncluttered sound and a lush, long reverberation

that is controlled by input level. This class has a flat bandwidth and can be adjusted over a wide range.

Vocal

Predelay

Size

Decay

Depth

Diffusion

/Density

Shape

Motion

Effect Enabled

Hold/Release