Table of Contents
Advertisement
MN000397A01-B
Chapter 2: Security Settings
For Windows 10, if the Device is not connected message appears, set up the PDA for
connection with a Windows 10 PC. See
PC on page
44.
4 Insert the CD provided by Motorola Solutions and run the Setup.exe file to start the KVL
Software Installation Wizard.
The End User License Agreement screen appears.
5 If you accept the agreement, click Accept.
6 In the window that appears, clear the check box next to Your device is using Enhanced
Security Settings, and click Next. The Transparent Security Settings will be applied after the
KVL application reinstallation/upgrade.
During the process, the PDA may restart several times. If the PDA is password protected, you
need to enter the password and tap Unlock after each restart.
IMPORTANT: If a prompt to disconnect and reconnect the USB Programming Cable
appears, disconnect and reconnect the USB Programming Cable, and click OK. If the
PDA is password protected, enter the password and tap Unlock.
7 When the process is completed, click Next → Exit to close the KVL Software Installation
Wizard.
The Transparent Security Settings are applied successfully.
8 Disconnect the USB Programming Cable from the PDA.
9 Connect the Security Adapter to the PDA.
If the Security Adapter is not detected automatically, ensure that the PDA is set to the USB OTG
mode. See
Setting the PDA to the USB OTG Mode on page
42
Setting Up the PDA for Connection with a Windows 10
43.
Send Feedback
Advertisement
Table of Contents
