Installation Guide
1.1 Installation Equipment Requirements
This section lists everything that must be in place or available to perform the installation, including the
equipment and its components.
Table 1: Included Equipment and Components
Category
Components
Screws
Cables
Table 2: Additional Equipment Needed
T15 Torx Screwdriver w/ Torque Measuring Capability
ESD Mitigation Equipment (site specific)
Ethernet Cable w/ RJ-45 connectors
Table 3: Torque Specifications for Screws
M5 x 12mm T15 Torx screws w/ washers
1.2 Installation Safety
E3000 chassis w/ PSUs, Fan Modules,
and pre-installed BMC Module
Rack Ears
Rails w/ rack-mounting hardware
F3x00 Storage Device
E3000 Fabric Device Blank
M5 x 12mm T15 Torx Pan
Head screws w/ washers
M5 x 10mm T15 Torx Flat
Head screws w/ washers
1.8m, C14 - C15 Power Cables
Equipment
T15 Torx Screwdriver
Level
Lift Equipment
Screw Type
M5 x 10mm T15 Torx screws
1.1 Installation Equipment Requirements
Item
1. Installation
# Included
1
2
1 set of 2
1 - 10
(depending on configuration)
0 - 9
(depending on configuration)
6
6
2
Required or Recommended?
Required
Recommended
Recommended
Recommended
Required
Required
Torque Value
3.38-3.61 Nm / 30-32 in-lbf
3.38-3.61 Nm / 30-32 in-lbf
2