Device Installation - Western Digital OpenFlex F3x00 Manual

Installation Guide
h. Verify that there are two PSUs listed, and that the status indicators in the Health column both
read OK.
1.6 Device Installation
This task provides instructions for installing F3x00 Storage Devices and E3000 Fabric Device Blanks in an
E3000 Chassis.
Step 1 : Note the installation order shown in the following diagram. All devices should be installed in
order from left to right from the front of the chassis. All slots that do not contain functional
devices should have device blanks installed from right to left. Follow this installation order and fill
any empty slots with device blanks.
Figure 38: Installation Order
Step 2 : Install the OpenFlex F3x00 s into the enclosure:
a. Press the release button on the front of the OpenFlex F3x00 . The release handle will eject
outward.
1. Installation

1.6 Device Installation

24