Fitting And Removing The Skirt; Mounting And Removing The Mowing Head - Stihl FSA 135 R Instruction Manual

7 Assembling the Trimmer
7.4

Fitting and Removing the Skirt

7.4.1 Fitting the Skirt
► Switch off the brushcutter and remove the battery.
1
2
► Slide the guide slot in the skirt (2) onto the universal
deflector (1) – it must snap into position.
► Push the line limiting blade (3) into the slot in the skirt (2).
► Insert and tighten down the screw (4) firmly.
7.4.2 Removing the Skirt
► Switch off the brushcutter and remove the battery.
► Insert the stop pin (2) into the hole in the skirt (1).
► Remove the skirt (1) with the stop pin (2).
The line limiting blade (1) can be left on the skirt.
0458-662-0121-A
3
4
2
1
7.5

Mounting and Removing the Mowing Head

7.5.1 Mounting the Mowing Head
► Switch off the brushcutter and remove the battery.
► Place the thrust plate (2) on the shaft (3) so that its smaller
diameter faces up.
► Fit the mowing head (1) on the shaft (3) and turn it
counterclockwise by hand.
► Insert the stop pin (4) in the bore up to the limit stop and
hold it depressed.
► Turn the mowing head (1) counterclockwise until the stop
pin (4) engages in position.
The shaft (3) is now blocked.
► Tighten down the mowing head (1) firmly by hand.
► Remove the stop pin (4).
7.5.2 Removing the Mowing Head
► Switch off the brushcutter and remove the battery.
► Insert the stop pin in the bore up to the limit stop and hold
it depressed.
► Rotate the mowing head until the stop pin engages in
position.
The shaft is now blocked.
► Unscrew the mowing head clockwise.
► Remove the thrust plate.
► Remove the stop pin.
English
1
2
3
4
4
1
17