Advertisement
Assembly Instructions
NOTE: Net is not shown in
Step 4 for clarity.
4. Connect three tube assemblies
(from step 3) to create a base
assembly. Repeat Step 4 to create
a second base assembly.
NOTE: Insert Tubes #3 into
each Connector #7 until
all parts are tight and
securely attached.
5. Attach Net pocket #9 loops to
hooks on connector #6 as
shown. Repeat step on the
second assembly.
NOTE: After completing
assembly of second
target the set is ready
to play disc golf.
4
6
5
-5-
7
6
Advertisement
