Advertisement
Assembly Instructions
NOTE: Top net is pre-assembled to
tubes 1 & 2 but its not shown
in the following steps for clarity.
1. Slide bottom tube #1 out of Tube
#2 as shown.
2. Once tube #1 is fully extended lock
in place with lock on connector #6.
NOTE: Sort parts #3 (Short Grey Tube) and
#4 (Long Grey Tube) into two groups
to clearly distinguish the two.
3. Insert Short Grey Tube #3 & Long Grey
Tube #4 as shown to complete one
tube assembly. Repeat steps 1-3 to
make five additional tube assemblies.
IMPORTANT: The Short Grey Tube #3
and Long Grey Tube #4 look very similar.
Be careful to install the Shorter Tube #3
at the top of the target or assembly
process will not work properly.
1
2
1
2
2
6
1
3
2
1
-4-
Advertisement
