Table of Contents
Advertisement
Maintenance and service
6.3 Service
6.3.1
Installation device
Description
The installation equipment is used to install and remove the power blocks for Motor Modules
in the chassis format.
It is used as a mounting aid and is placed in front of and secured to the module. The
telescopic rails allow the withdrawable device to be adjusted according to the height at which
the power blocks are installed. Once the mechanical and electrical connections have been
undone, the power block can be removed from the module, whereby the power block is
guided and supported by the guide rails on the withdrawable devices.
Figure 6-1
Article number
The article number for the installation device is 6SL3766-1FA00-0AA0.
68
Installation device
Air-Cooled Chassis Power Units - supplement to Motor Module 6SL3320-1TG41-5AA3
Equipment Manual, 10/2020, A5E50422764A
Advertisement
Table of Contents
