Jabra Elite 65t Titanium Black How Do

How do I pair my Jabra earbuds with my mobile device?
Jabra Elite 65t - Titanium Black
To pair with your mobile device for the first time, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. When you unpack your Jabra true wireless earbuds from the box, turn
them on by pressing and holding the Multi-function button on the right
earbud (1 second) until the LED flashes green.
The earbuds enter pairing mode automatically.
3. Go to the Bluetooth menu on your mobile device and select the Jabra
earbuds to complete the pairing. Alternatively, wear the earbuds to
hear the voice guided instructions.
Enter "0000" (four zeros) if you are asked for a pin code.
If pairing is successful, your earbuds will appear in the list of connected
Bluetooth devices on your mobile device. The Bluetooth connection will
also be announced in the earbuds.
To re-pair with your mobile device or pair with an additional mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Start with the right earbud turned off and in your hand (not in the
charging case). To turn off the right earbud, press and hold (5 seconds)
the Multi-function button, until the LED flashes red.
3. To enter pairing mode, press and hold (5 seconds) the Multi-function
button until the LED flashes blue.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra product from the list. Alternatively, wear the earbuds to hear the
voice guided instructions.
Enter "0000" (four zeros) if you are asked for a pin code.
When you take the left earbud out of the charging case, it will connect
automatically with the right earbud. If the left earbud is turned off,
https://www.jabra.no/supportpages/jabra-elite-65t-iet-6500/100-99000000-
60/faq/e09ec7d7-ae74-47a3-902f-a8270548f526
06/04/2021 02:25
Side 1 av 2