Page 1
FAQ - Top questions How do I get the best experience when I unpack my new Jabra Elite Sport earbuds? To get the best experience with your new Jabra Elite Sport, follow these first time steps. 1. Place both earbuds in the charging case and charge them for 3 hours.
Page 2
When you have paired with the Jabra Elite Sport, your pairing list will look like this.
Page 3
Note: A second Bluetooth profile, for Jabra Elite Smart, will also appear on the pairing list. Only pair with this profile if you intend to use your Jabra Elite Smart with Apple Healthbook. Note that using your earbuds with Apple Healthbook may reduce the battery time.
Page 4
4. You may need to press and hold the Volume down button (3 seconds) located on the left earbud to turn it on. First time pairing after first time charge 1. Turn on Bluetooth on your smartphone. 2. Remove the Jabra Elite Sport from the charging case.
Page 5
3. Your Jabra Elite Sport automatically turns on and is ready to pair with your smartphone. 4. Follow the voice-guided instructions to pair. Enter “0000” (four zeros) if you are asked for a PIN. Second time pairing 1. Turn on Bluetooth on your smartphone.
Page 6
Then remove the earbuds from the case, replace them in the case, and close the lid. This will complete the firmware update. Need more help? Please contact Jabra Support at the bottom of the page and we will do our best to help you.
Page 7
Jabra Sport Life app version 2.8 - Android Jabra Sport Life app version 2.8 - iOS Voice guidance is turned on, as the default setting, on your Jabra Elite Sport. To change the setting, follow these steps: 1. Open Jabra Sport Life.