Basic Operations - JVC KD-SH77R Instructions Manual

2
1
Turn on the power and select the
source.
When you press the button for
the first time, the power comes
on. Then each time you press
the button, the source changes
as follows.
For KD-SH77R
FM TUNER DAB TUNER
AUX INPUT
AM TUNER
For KD-SH55R
FM TUNER DAB TUNER
AM TUNER AUX INPUT
* If a CD is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the DAB Tuner or the CD
changer, you cannot select it as the source to
play.
***ONLY for KD-SH55R: To select the external
component, you have to change the external
component setting (see page 26).
To operate the tuner (FM or AM),
see pages 8 – 10.
To operate the CD player,
see pages 17 – 19.
To operate external components (AUX
INPUT and LINE INPUT),
see pages 30 – 31.
To operate the CD changer,
see pages 32 – 33.
To operate the DAB tuner,
see pages 34 – 37.
1
**
*
CD PLAY
CD CHANGER
LINE INPUT
**
*
CD PLAY
CD CHANGER
or
LINE INPUT

BASIC OPERATIONS

2
Adjust the volume.
**
Volume level indicator
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
**
make it come out.
***
3
Adjust the sound as you want.
(See page 20.)
To drop the volume in a moment
Press and hold
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold SOURCE
appears on the display.
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 23.
To increase the volume.
To decrease the volume.
Volume level appears.
/ATT while listening to any
until "SEE YOU"
7