JVC KD-SH77R Instructions Manual page 35

3
Start searching an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4
Select a service you want to listen to.
1 Press M/B (mode/band).
2 Press ¢
Press ¢
to
search ensembles of
higher frequencies.
4 to search
Press
ensembles of lower
frequencies.
Within
5 seconds
or
4 to select a service
you want.
To change the display information while
tuning into an ensemble
Normally service name is shown on the display.
If you want to change the display information,
press D (display).
Each time you press the button, the following
information appears on the display for a while.
Service name
Ensemble name
Channel number
Frequency
To tune into a particular ensemble without
searching:
1 Press SOURCE to select DAB tuner as the
source.
2 Press and hold M/B (mode/band) for more than
1 second repeatedly to select the DAB band
(DAB 1, DAB 2 or DAB 3).
3 Press and hold ¢
than 1 second. "MANUAL" flashed on the
display.
4 Press ¢
or
ensemble you want is reached.
• If you hold down the button, the ensembles
keep changing until you release the button.
4 for more
or
4 repeatedly until the
35