Clearances For Multiple Units - Carrier 38MHRC Service Manual

CLEARANCES
D
NOTE: The outdoor unit must be mounted at least 2in. (50mm) above the maximum anticipated snow depth.
9.8in (25cm) or more for
proper airflow 24in(61cm)
or more is
recommended
for service
SG-38MHRC-01
A
Fig. 5 — Clearances
Table 6 — Clearances
UNIT
A
B
C
D
E
9.8in (25cm) or more for proper airflow
24in (61cm) or more is recommended
for service
Fig. 6 — Clearances for multiple units
Specifications subject to change without notice.
B
C
Air-outlet
MINIMUM VALUE IN. (MM)
19in (48cm) or more on
a multiple parallel unit
arrangement 4in (10cm)
or more on a single
parallel unit arrangement
59in (150cm)
or more when
facing each other
Blowing into the air-inlet of other
condenser shall be avoided.
59in (150cm) 24in (60cm)
or more on a or more
multiple parallel
unit arrangement
24in (61cm) or more on a single parallel unit arrangement
Air-inlet
E
24 (609)
24 (609)
24 (609)
4 (101)
4 (101)
9