Installation; Confirming The Product; Installation And Connection; Fixing Of The Extended Safety Unit - Mitsubishi Electric MELFA CR750 Series Instruction Manual

2 Installation

2 Installation

2.1 Confirming the product

Please check to see if the package has all the necessary parts before use.
Table 2-1 List of items included in the package
Number
1 Extended safety unit
2 Connector for wiring
3
Instruction manual

2.2 Installation and connection

CAUTION
CAUTION
CAUTION
2.2.1

Fixing of the extended safety unit

Fix the extended safety unit on the place with no vibration using the hole shown in the dimensional outline
drawing *1 (Fig. 7-1) with a screw M4.
2-6 Confirming the product
Item Quantity
1
2
1
Make sure the power of the robot controller is turned OFF before fixing the extended
safety unit, connecting the robot controller and the extended safety unit, or installing the
connector to the extended safety unit.
Please pay attention to the orientation of insertion of the connector. The connector may
be broken if it is forcibly inserted in an incorrect orientation.
When an operator with static electricity installs/connects the product, the robot controller
or the extended safety unit may be broken. Start the work after all the charged static
electricity is removed.
Outer appearance
CD-ROM
Model name
U770B068G001
U770D007G51
BFP-A3374