Advertisement
We, Belkin International Inc, of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility
that the products described in this carton comply to the declarations found at:
http://www.belkin.com/us/support-article? articleNum=289064.
NIAP Protection Profile
These products are certified to the NIAP Protection Profile PSS version 4.0
certification for peripheral sharing switch devices.
Installation Precautions
NOTE: In order to comply with the product's Common Criteria evaluation and
to prevent unauthorized administrative access to the product, the default
administrator username and password must be changed prior to first product
use.
Do not connect this product to computing devices that:
• are TEMPEST computers
• include telecommunication equipment
• include frame grabber video cards
• include special audio processing cards
Security Vulnerability
If you are aware of a potential security vulnerability while installing this
product, contact Technical Support immediately by:
• Calling Belkin Technical Support at (800) 282-2355
• Referring to http://www.belkin.com/us/support
WARNING: To avoid a potentially fatal shock hazard and possible damage
to equipment, please observe the following precautions.
• Do not disable the power grounding plug. The grounding plug is an
important safety feature.
• Plug the power cord into a grounded (earthed) outlet that is easily
accessible at all times.
• Disconnect the power from the product by unplugging the power cord
from either the electrical outlet or the product. The AC inlet is the main
disconnect for removing power to this product. For products that have
more than one AC inlet, to remove power completely, all AC line cords
must be disconnected.
• This product has no serviceable parts inside the product enclosure. Do
not open or remove product cover.
Safety and Regulatory Statements
CAUTION: Anti-tamper Caution - This product is equipped with an
always-on, active anti-tampering system. Any attempt to open the
product enclosure will activate the anti-tamper triggers, rendering the
unit inoperable and voiding its warranty.
WARNING: Unit Enclosure Warning - If the unit's enclosure appears
disrupted or if all LEDs flash continuously, remove the product from
service immediately and contact Technical Support.
Change Management
For change management tracking, perform a quarterly log check to
verify that the RFD was not improperly used to override the current
device policy by an unauthorized person.
CAUTION: Some Belkin products contain a lithium battery. This
battery is not a field replaceable item, and replacement should not
be attempted by a user.
If errors occur when using the product and the battery is suspected,
contact Belkin Technical Support.
WARNING: For Service Personnel Only - There is a risk of explosion
if the battery is replaced with an incorrect type. Dispose of used
batteries according to the manufacturer's instructions.
This product is for use with other products that are Listed or Certified
by a Nationally Recognized Testing Laboratory (NRTL).
8820-02954 Rev.A00
Advertisement
