Fiat 500X Owner's Handbook Manual page 247

Track information
display
Press the "Info" button to show the
information on the track being listened
to on the display.
Press the "X" button to exit the screen.
Shuffle
Press the ">" button then the "Shuffle"
button to play the tracks on the USB
/ iPod, SD (where provided) or Blue-
tooth® in a random order.
Press the "Shuffle" button again to
deactivate the function.
Repeat
Press the ">" button then the "Repeat"
button to listen to the track again.
Press the "Repeat" button again to
deactivate the function.
Bluetooth® SOURCE
Pairing a Bluetooth®
audio device
Proceed as follows:
❒ activate the Bluetooth® function on
the device;
❒ Press the MEDIA button on the front
panel;
❒ if the "Media" source is active, press
the "Source" button;
❒ select the Bluetooth® Media
source;
❒ press the "Add Device" button;
❒ search for Uconnect™ on the Blue-
tooth® audio device (during the pairing
stage a screen is displayed showing the
progress of the operation);
❒ when requested by the audio device,
enter the PIN code shown on the
system display or confirm on the device
the PIN displayed;
❒ if the pairing procedure is completed
successfully, a screen is displayed.
Answer "Yes" to the question to pair the
Bluetooth® audio device as favourite
(the device will have priority over all
other devices to be paired subse-
quently). If "No" is selected, the priority
is determined according to the order of
connection. The last device connected
will have the highest priority;
❒ an audio device can also be paired
by pressing the PHONE button
on the front panel and by selecting
"Settings" or, from the "Settings" menu,
selecting "Phone/Bluetooth".
IMPORTANT If the Bluetooth® con-
nection between mobile phone and
system is lost, consult the mobile
phone owner's handbook.
USB/iPod SOURCE
USB/iPod mode
To activate the USB/iPod mode insert
the corresponding device (USB or iPod)
in the USB port located on the central
tunnel (fig. 172).
172
Some versions feature a second USB
port, located inside the front armrest.
SD Card SUPPORT
(where provided)
To activate SD mode, insert an SD Card
in the dedicated slot on the vehicle
(see fig. 173).
IMPORTANT Only use SD cards
dedicated to a single function (e.g. SD
cards for navigation exclusively
separate from SD cards for MP3 use
exclusively). Avoid transferring content
from one SD card to another.
F1B0210C
245