Fiat 500X Owner's Handbook Manual page 232

❒ select the Bluetooth® Media
source;
❒ press the "Add Device" button;
❒ search for Uconnect™ on the Blue-
tooth® audio device (during the pairing
stage a screen is displayed showing the
progress of the operation);
❒ when requested by the audio device,
enter the PIN code shown on the
system display or confirm on the device
the PIN displayed;
❒ if the pairing procedure is completed
successfully, a screen is displayed.
Answer "Yes" to the question to pair the
Bluetooth® audio device as favourite
(the device will have priority over all
other devices to be paired subse-
quently). If "No" is selected, the priority
is determined according to the order of
connection. The last device connected
will have the highest priority;
❒ an audio device can also be paired
by pressing the
on the front panel and by selecting
"Settings" or, from the "Settings" menu,
selecting "Phone/Bluetooth".
IMPORTANT If the Bluetooth® con-
nection between mobile phone and
system is lost, consult the mobile
phone Owner's handbook.
230
PHONE MODE
Activating the Phone mode
Press the PHONE button on the front
panel to activate the Phone mode.
The buttons on the display can be used
to:
❒ compose the phone number (using
the graphic keypad on the display);
❒ display and call the contacts in the
mobile phone phonebook;
❒ display and call contacts from the
registers of recent calls;
❒ pair up to 10 phones/audio devices
to make access and connection easier
and quicker;
❒ transfer calls from the system to the
mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the vehicles's audio system;
PHONE button
the system automatically mutes the
radio when the Phone function is used.
NOTE For the list of compatible mobile
phones and functions supported,
consult the www.driveuconnect.eu
website .
Pairing a mobile phone
Proceed as follows:
❒ activate the Bluetooth® function on
the mobile phone;
❒ press the PHONE button on the front
panel;
❒ if no phone is paired with the system
yet, the display shows a dedicated
screen;
❒ select "Yes" to start the pairing
procedure, then search for the
Uconnect™ device on the mobile
phone (if "No" is selected, the Phone
main screen is displayed);
❒ when prompted by the mobile
phone, use its keypad to enter the PIN
code shown on the system display
or confirm on the mobile phone the PIN
displayed;
❒ from the "Phone" screen you can
always pair a mobile phone by pressing
the "Settings" button: press the "Add
Device" button and proceed as
described above;
❒ during the pairing stage a screen is
displayed showing the progress of
the operation;