Table of Contents
Advertisement
can be found at the back of the phone.
Click the Save button.
Registering a Phone
This section describes how to register a Panasonic phone using DHCP, TFTP or HTTP.
The following topics are covered:
DHCP
TFTP or HTTP
DHCP
Configure DHCP
Make sure your DHCP router is configured to use option 66 to automatically instruct phones
with the URL for auto provisioning. For more information, refer to the router documentation
or contact your network administrator.
Phone's first boot or user-initiated reboot
The auto provisioning process will start during the phone's first boot or after the reboot
process has been initiated by the user. The DHCP server will instruct the phone from where to
pickup an appropriate configuration file. If everything is done as described above, you should
have successfully registered your phone to PBXware.
Dial *123 to verify registration.
TFTP or HTTP
Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
Enter username and password and press the Confirm button.
login details are as follows: username is admin and password is adminpass.
Click the Maintenance tab.
Click the Provisioning Maintenance link in the left navigation menu.
Choose what server type you intend to use: HTTP or Trivial FTP.
recommendation is to use HTTP.
If you choose to use server type HTTP, enter http:// followed by Hostname or IP
Address, followed then by /prov in Standard File URL.
Example of a Hostname using HTTP:
http://username:password@192.168.1.1/prov/{mac}.cfg
NOTE:
The factory default
NOTE:
Our
Advertisement
Table of Contents
