Table of Contents
Advertisement
Example of an IP Address using HTTP:
http://username:password@192.168.1.1/prov/{mac}.cfg
Enter the Auto Provisioning username and password into the Authentication ID and
Authentication Password fields.
If you choose to use server type TFTP, enter tftp:// followed by Hostname or IP
Address
Example of a Hostname: tftp://192.168.1.136/{mac}.cfg
Example of a IP Address: tftp://192.168.1.136/{mac}.cfg
Click the Save button.
You will have to wait a couple of seconds for the configuration to be updated.
power off your phone.
If everything is done as described above, you should have successfully registered your phone
to PBXware.
Dial *123 to verify registration.
Retrieved from "http://wiki.bicomsystems.com/Panasonic_KX-HDV230C"
Disclaimers - About Bicom Systems Wiki
NOTE:
Do not
Advertisement
Table of Contents
