Download Print this page

Faqs; Other Information; Upholstery Tool; Dusting Brush - Hoover Air Mini Quick User Manual

Advertisement

FAQs

Warning: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance
/troubleshooting checks.
Is there an accessory missing?
• Check the 'Getting Started' page in this guide or the box that the machine came in to make sure that the part
is definitely included in your unit.• If it is missing, we're here to help. Please contact your local service agent.
Why won't the vacuum cleaner pick up?
• The filters may need cleaning, please refer to the 'Looking After Your Machine – Filters'
page of this user guide (p5-6)
• The separator may be clogged, please refer to the 'Looking After Your Machine – Filters'
page of this user guide (p5-6)
• There may be a blockage in the hose, please check the hose and remove the blockage
• The dirt container may be full or blocked, please refer to the 'Looking After Your Machine
– Emptying and cleaning dirt container' page of this user guide (p5)
• The dirt container may be incorrectly installed, please ensure the dirt container is locked in place
What do I do if an accessory/the unit becomes damaged or broken?
• Please check if the damage is with the accessory or the unit. To do this, firstly remove the accessory from
the unit and check if there is suction from the hose. If there is suction from the hose this confirms that the
damage is with the accessory. Please visit Hoover.ae or contact your local service agent.
Why is dust escaping from the vacuum?
• The filters may not be installed correctly, please refer to the 'Looking After Your Machine – Filters'
page of the user guide (p5-6)
• The dirt container may be full or blocked, please refer to the 'Looking After Your Machine
– Emptying and cleaning dirt container' page of this user guide (p5)
• The filters may need cleaning, please refer to the 'Looking After Your Machine – Filters'
page of this user guide (p5-6)
• There may be a blockage in the hose, please check the hose and remove the blockage
Why does my vacuum cleaner have no power?
• It may not be plugged into the electrical socket correctly. Ensure that the plug is pushed into the electrical
socket securely
• The electrical socket may not be working. Check the fuse or breaker and consult an electrician
• The motor thermostat may have tripped. Switch off and unplug the vacuum cleaner. Check the unit for
blockages, clean the filters – please refer to the 'Looking After Your Machine – Filters' page of this user guide
(p6) and clean the separator – please refer to the 'Looking After Your Machine – Emptying and cleaning dirt
container' page of this user guide (p5). Leave the vacuum cleaner for 24 hours before switching the vacuum
cleaner back on
Why does the vacuum cleaner cut out?
• The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit off. Should this occur, unplug the vacuum cleaner from the electrical socket and
turn off the switch. Remove and empty the dirt container. Check the hose for blockages. Clean the filters. Allow
the unit to cool for approximately 1 hour (if you have cleaned the filters you will need to wait 24 hours for the
filters to dry before putting them back in the machine)
What do I do if the unit becomes damaged or broken?
• Visit Hoover.ae or contact your local service agent.
7
Consumables
To purchase spares and accessories, please visit Hoover.ae
The use of genuine Hoover spare parts helps to maintain optimised
performance and validates your guarantee
Filter kit (Type 60): 1-1-132605-00
2-in-1 Tool (Type 2): 1-1-132606-00
Upholstery tool (Type 3): 1-1-132607-00
Flexi crevice tool (Type 1): 1-1-131609-00
Stretch hose (Type 1): 1-1-132610-00
Dusting Brush (Type 5): 1-1-132611-00
Technical Specification
Voltage: 220-240V -50Hz
Filters: Pre-motor filter (washable)
H12 HEPA (anti-bacterial) Post-motor filter
Subject to technical change without notice.
EEC Statement of Compliance
Manufacturer/EEC importer: Hoover Limited, hereby on our own responsibility,
declare that the HC87-AMM series is manufactured in compliance with the
following Directives:
Safety: 2006/95/EC Low Voltage Directive
EMC: 2004/108/EC Electromagnetic Compatibility Directive
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.

Other Information

8

Advertisement

loading

This manual is also suitable for:

Hc87-amm