Pip (Picture In Picture) - Sharp 27N S300 Operation Manual

PIP (Picture In Picture)

L With the VIDEO inputs, you can watch two pictures at the
same time: one from the antenna or cable TV input and the
other from the VIDEO input.
L To View the Inset Picture.
Press PIP .
(Press the button to turn the Inset Picture on and off.)
L Channel Display when PIP is ON (4 seconds).
Example:
Main Picture — 22
Inset Picture — VIDEO Input
L To Select the Input for the Inset Picture.
Press SELECT .
(Each time you press the button, the picture will change as shown
below.)
L To Swap the Main and Inset Pictures.
Press SWAP .
(Press the button to SWAP the pictures again.)
Example:
Main Picture
Inset Picture
32
32-48 27NS300/32/36NS400 1.1
Channel display
for Main Picture
Channel display
for Inset Picture
Press the SWAP button.
22CH
INPUT 1
32
PIP
PIP
SWAP FREEZE MOVE SELECT
SWAP
FREEZE
Main Picture INPUT 1
Inset Picture 22CH
5/31/00, 8:26 AM
SELECT
MOVE